Safe protection with natural products
ROND Is a polyethylene washer.
RONDis a polyethylene washer with 50 mm diameter with a central hole to be used for fixing PANEL and BENTOTAP.
1.5 pieces/sqm for BENTOTAP – 2.5 pieces/sqm for PANEL and BENTOTAP.
Waterproofing bentonite geocompound.
BENTOTAP LITEis a multilayer waterproofing membrane with the same structure as BENTOTAP.
BENTOTAP Lite membranes are used in civil engineering for waterproofing underground structures, of works such as bridges, roads, foundations, basements, car parks and in all cases where maximum protection against water infiltration is required.
BENTOTAP Lite is at its best in non-critical conditions of use and when the cost factor can make a difference.
ANDALO (TN)
Large Square Paganella
NOVI LIGURE (AL)
Station Underground Parking
PISA (PI)
Fraz. Hamlet Tirrenia, Residential Building
SAN GENESIO ED UNITI (PV)
Residential Building
ROZZANO (MI)
Po Street
CAGLIARI (CA)
– Magnolia Residential Complex
CAGLIARI (CA)
SAN SALVATORE M.TO (AL)
Bentonite swelling curb for construction joints.
The curb is composed of 75 percent natural sodium bentonite
and 25 percent polymers.
Small cracks may form in the construction joints during concrete hardening.
This can cause water infiltration.
The profile will swell up to 400% in volume compared to its initial size in contact with water, thus ensuring excellent waterproofing.
Holes and cracks are thus effectively plugged.
ALBENGA (SV)
Reg. San Giorgio, Residential Building
ALBISOLA MARINA (SV)
Via Dei Ceramisti, Underground Parking
BERGAMO (BG)
Piazza Aquileia, Pit Elevator
BIASSONO (MB)
Via Monte Cassino, Residential Building
CAGLIARI (CA)
Remosa Spa,Mould Press Underground Pit
CECINA (LI)
Residential Building
CENIGA DI DRO (TN)
Residential Building
SALO’ (BS)
P.zza Leonardo Da Vinci, Multi-level park
TORRE GRANDE (OR)
Residential Building
STOPBIT is a sealing adhesive for localised STOP laying operations.
STOPBITis a sealing adhesive for localised STOP laying operations.
It is based on bitumen, elastomers, aromatic hydrocarbons, inert fillers, and additives. It has characteristics of permanent flexibility.
STOPBITis used for laying STOP on all types of surfaces, even on damp substrates. Can be used with standard guns.
BENTOTAP GAS Is a multilayer waterproofing membrane.
BENTOTAP GAS is a multilayer waterproofing membrane with the same structure as BENTOTAP and the addition of a high-density polyethylene (HDPE) sheet is heat-sealed on the side of the nonwoven: this layer makes the membrane even less permeable to water, efficient even in case of saline infiltration, and it is imperviousto gases.
BENTOTAP GAS membranes are used in civil engineering for the waterproofing underground structures of works such as: bridges, roads, foundations, basements, car parks and in all cases where maximum protection against water infiltration is required.
A resistant polymer sheet (HDPE) is also coupled to BENTOTAP GAS through a heat-sealing process.
This makes it not just an excellent and robust waterproofing membrane, but also a practical and convenient obtaining a gas-impermeable barrier,wich is increasingly required today, for example in the case of soils with Radon gas emissions.
High performance waterproofing bentonite geocompound.
BENTOTAP is a multilayer waterproofing membrane consisting of:
– A propylene geotextile with high mechanical properties of resistance to traction, tearing and punching.
– A non-woven in propylene and PET with flexibility and adhesion to concrete, able to stably encapsulate granular bentonite inside it.
– Terrae: high content natural sodium bentonite in granules.
A transverse micro-punching (needling) firmly holds the first three layers of the membrane together, while ensuring high adhesion to the concrete and that no horizontal movements of the bentonite occur.
BENTOTAP membranes are used in civil engineering for waterproofing underground structures of works such as bridges, roads, foundations, underground floors, car parks and in all cases where maximum protection against water infiltration is required.
BENTOTAP membranes are suitable for demanding conditions of use such as in the case of high and constant hydraulic pressure or when particular resistance to mechanical and structural stress is required.
